DIO Headlight Ballast

Description

Diode Dynamics HYLUX D2 HID Ballast

These are D2-connector 2A88 CANBUS 35 watt HID ballastsfrom HYLUXTEK. With true OEM-grade manufacturingthese ballasts are intended to perform for yearswith absolutely zero failures.If you have a D2 OEM HID setup with a failed ballastyou can purchase one of these to get back up and running at a fraction of the cost of a new ballast from the dealer. You’ll simply need to tap the positive and negative input wires into the power wires powering your original ballast.This ballast should be used with D2 bulbs only (D2SD2RD2Cetc). If you have a D1 bulbor a standard aftermarket AMP HID size such as 9006H1or H11please use our AMP or D1 ballast instead.With the OEM-grade 23kV igniterwhich is also fully waterproofthis ballast will strike the bulb perfectlyevery single time. It will function in even the coldest of environmentswith a rated minimum operating temperature of -40 degrees.This ballast has a CANBUS modulewhich is designed to provide extra resistance to the vehicle. This is required for operation in many newer vehiclesas they may otherwise shut off power to your headlightsdue to the lower power consumption.The CANBUS module also regualtes the power inputto prevent errors with PWM signalsWe recommend using high-quality aftermarket bulbs with this ballastsuch as CNLightor an OEM-grade bulb such as Philips or OSRAM. Howeverif you have any randomcheap bulb that is in working conditionthis ballast will drive it perfectly.